产品banner
Your current location: Home >> Products >> Mixed 3 color injection molding machine
Mixed 3 color injection molding machine HYW-1700

Mixed 3 color injection molding machine HYW-1700

  • The category:Mixed 3 color injection molding machine
  • Number of visits:Time
  • Release date:2024-03-06 13:47:28
  • Product
  • Performance
  • Technical


The upper end of the pipeline main (P,T,P) is the executive loop system, and the lower end is the main loop system and the auxiliary loop system. Drive ring system: mainly composed of each drive mechanism (cylinder) and command and control device (main control valve). Its function is to enter the high pressure oil into the vertical two-color injection molding machine pipeline P into the left and right cavities of the cylinder according to the program, and push the oil rod to complete the action. Electromagnetic directional valve is used to realize the time, order and position of high pressure oil intake.

The electromagnetic solenoid valve transmits its working instructions to the solenoid valve through the telecommunication number, and the solenoid valve controls its spool action, infuses the high-pressure oil of the control oil circuit (P) into the high-pressure oil of the control oil circuit (P), and connects the high-pressure oil to the solenoid valve. Main loop system: including power supply and control module; The oil pressure (P) and flow rate (Q) generated by the power source system (motor, oil pump) are composed of the command (CU) and control (CM) modules (pressure valves, laser valves, etc.).

The high-pressure oil sent by the pump, the time of entering the main road, the sequence, the pressure and the flow rate, the vertical disc injection molding machine are all through a flow valve, the pressure valve obtained by the electromagnet, indicating the time, the sequence, the strength, the strength, the strength, the strength, the pressure, the flow rate, the pressure of the spool and the opening. A "network" is formed between the executive circuit and the main circuit through the inlet pipe P(high pressure), the return pipe T(low pressure) and the control loop P(high pressure).

This article can be found at:http://en.nb-haiying.com/product/749.html
Previous:None

Recently:

Related products

Related News

Scan to contact us

contact us
Bottom contact number

   Add:NO.288 Zhuangshi Road,Zhuangshi Industrial Distrial Area,Ningbo City,China.

   Manager Wu:0086-18858011231

      Manager Chen:0086-13858285673

      Manager Emma: 0086-18758327792

      Tel:0574-86322398

   E-mail:6882601@163.com

Navigation

About                         Product

Case                           News

Contact us

service

0086-18858011231

Service hotline

Technical support:Huaqi No:浙ICP备17059205号-1