产品banner
Your current location: Home >> Products >> Mixed 2 color injection molding machine
Mixed 2 color injection molding machine HYW-5280

Mixed 2 color injection molding machine HYW-5280

  • The category:Mixed 2 color injection molding machine
  • Number of visits:Time
  • Release date:2024-03-06 14:00:08
  • Product
  • Performance
  • Technical


The selection and adjustment of injection molding process parameters of mixed multi-color injection molding machine will have a very important direct impact on the quality of plastic products. The process parameters of injection molding include: temperature, pressure, speed, stroke, etc. In general, the temperature of injection molding includes material temperature, mold temperature and drying temperature. The material temperature includes the heating temperature of the barrel and the injection temperature of the nozzle; Mold temperature is the temperature of the mold, which refers to the inner wall temperature of the abrasive tool in contact with the product; Drying temperature is the temperature at which certain materials are dried in the preparation work before forming. The injection temperature, that is, the material temperature, will directly affect the injection pressure, so the injection temperature must be controlled within the appropriate range, otherwise too high and too low temperature will affect the quality of the plastic parts. In the actual injection process, the injection temperature is higher than the temperature of the barrel, which is closely related to the injection speed and material properties.

Although the gradual color injection molding machine injection molding technology has been proposed and applied to the actual production, the mixed two-color injection molding machine is realized due to its relatively high requirements for the injection molding machine and a special injection molding process in which the plastic color is changed from thick to light or the color is changed from light to thick. In the past, the demand for a special injection molding process with a plastic color changing from thick to light or color changing from light to thick to achieve complex plastics was not high, so it has not been paid attention to in the early stage. Until the improvement of production technology and the improvement of people's requirements for plastic products, the technology has been rapidly developed, especially the two-color multi-color injection molding technology is widely used. With the continuous development of the plastic industry, the multi-functional composite structure of plastic products and green environmental protection will become the development direction of the plastic industry, a variety of new injection molding machines and injection molding processes continue to emerge, backward and inefficient production technology is bound to be eliminated with the progress of injection molding technology, Only by constantly updating or improving production equipment and technology can we better adapt to the development of the market.

HYW—5280Mixed 2 color injection molding machine Main technical parameters

Name

Unit

Numerical value

螺杆直径                    ScrewDiameter

mm

80

70

理论注射容积                   ShotVolume

cm³

Ⅰ+Ⅱ=2880

实际注射质量               ShotWeight(ps)

g

Ⅰ+Ⅱ=2672

注射压力               InjectionPressure

Mpa

192

167

螺杆转速                      ScrewSpeed

rpm

2-150

2-160

合模力                      ClampingForce

KN

5280

开模行程                     PlatenStroke

mm

780

拉杆内间距           SpaceBetweenTie-bars

mm

820×780

最 大模厚               Max.MouldThickness

mm

820

最小模厚               Min.MouldThickness

mm

350

顶出行程             EjectorStokeDistance

mm

200

液压顶出力                 EjectorTonnage

KN

128

油泵最 大压力             Max.PumpPressure

Mpa

16

油泵马达功率                   MotorPower

KW

82

电热功率                      HeaterPower

KW

36

机器外形尺寸      MachineDimesions(LXWXH)

m

7.80×2.40×2.60

重量(约)         MachineWeight(about)

T

23

Note: The above parameters are subject to change without prior notice.


 Flow-through valve

If the system or local pressure exceeds the spring-adjusted value, the spool automatically opens, returning the pressure flow to the tank.

Although the secondary components only play an auxiliary role, the quality of the secondary components will affect the function of the system. The secondary component is the fuel tank,

Pipes and joints, coolers, oil filters, pressure gauges, mixed three-color injection molding machine lubrication lubricators, etc. The use of appropriate tubing and joints, the hydraulic components, accessories and measuring instruments to connect together, can form a complete hydraulic system. For hydraulic devices, pipelines and joints are required to have sufficient strength and pressure reserve, reliable use, convenient installation and disassembly, and low energy consumption when conveying working media. Pipe fittings are divided into hard pipes and hoses. The hard tube can be used for the connection of two mutual fixed components, and can not be bent arbitrarily during assembly, can withstand greater pressure and be firm and reliable, and the pressure loss is small. A hose can be used to make a pipe connection of two relative displacement components, or to frequently change the connection of components to the hydraulic system. Easy to install, not afraid of vibration, and can partially absorb the impact of the hydraulic system, but the pressure loss along the way is greater than the hard pipe.

This article can be found at:http://en.nb-haiying.com/product/742.html

Recently:

Related products

Related News

Scan to contact us

contact us
Bottom contact number

   Add:NO.288 Zhuangshi Road,Zhuangshi Industrial Distrial Area,Ningbo City,China.

   Manager Wu:0086-18858011231

      Manager Chen:0086-13858285673

      Manager Emma: 0086-18758327792

      Tel:0574-86322398

   E-mail:6882601@163.com

Navigation

About                         Product

Case                           News

Contact us

service

0086-18858011231

Service hotline

Technical support:Huaqi No:浙ICP备17059205号-1